Free-Reprint Article Written by: Phillip Fry
See Terms of Reprint Below.


*****************************************************************
*
* This email is being delivered directly to members of the group:
*
* med-content@yahoogroups.com
*
*****************************************************************



Article Title: How to Do Low-Cost Mold Sample Collection and Mold Laboratory
Identification of Mold Species
Article Author: Phillip Fry
Article Copyright: 2005

Article URL:

http://thePhantomWriters.com/free_content/d/f/low-cost-mold-sample-collections.s\
html

Article Autoresponder:
mailto:low-cost-mold-sample-collections@...

Author Contact Email:
mailto:moldinspector@...

Formatted to 65 Characters per Line
Word Count: 626 words



-----------------------------------------------------------------

This article was written by Phillip Fry.

The only role of http://thePhantomWriters.com and
http://Article-Distribution.com is in the actual
distribution of this article to you.

At TPW, we are providing an additional free tool for
webmasters who reprint the articles we distribute. If your
software does not automatically hyperlink the URL's in your
site copy, please use our Text-to-Hyperlink Conversion Tool
to convert all URL's and Mailto addresses to the required
hyperlinked format:

http://thephantomwriters.com/link-builder.pl

-----------------------------------------------------------------

TERMS OF REPRINT - Publication Rules

This is a Free-Reprint article. The only requirements for
publishing this article are:

* You must leave the article and resource box unedited. You are
not allowed to change our recommendations, nor are you allowed
to change the context of the article.

* You may not use this article in UCE (Unsolicited Commercial Email).
Email distribution of this article MUST be opt-in email only.

* We ask that you forward a copy of the ezine or newsletter
that contains the article inside to the author at:
mailto:moldinspector@...

* If you post this article on a website, you MUST set any URL's
or Mailto addresses in the body of the article and most
especially in the Author's Resource Box as hyperlinks. We
request that you also send us a copy of the URL where you
have posted this article.

We are providing free Text-to-Hyperlink Conversion Tool for
webmasters who need an easy way to convert the plain text in
this article to hyperlinks where required, for the purpose of
meeting our hyperlink requirements:

http://thephantomwriters.com/link-builder.pl


If you find any of the rules to be unsavory or unacceptable, please
do not publish this article. While we are happy to make the content
available to you for your own use, we must insist on having our rules
and *Terms of Reprint* honored in full.


-----------------------------------------------------------------

How to Do Low-Cost Mold Sample Collection and Mold Laboratory Identification of
Mold Species
Copyright © 2005 Phillip Fry
Mold Inspector Laboratory International, Ltd.
http://www.moldlab.biz/



VANCOUVER, CANADA. Although any mold in elevated levels indoors
can cause severe health problems for mold-sensitive occupants,
several toxic molds such as Stachybotrys, Aspergillus, and
Penicillium pose far greater health risks than others, according
to Phillip Fry, Certified Mold Inspector and author of the book
"Mold Health Guide."

Thus, many homeowners, rental property owners, tenants,
employers, and employees in Canada, the USA, and worldwide want
to know, and need to know, the precise identities of the various
mold species infesting their moldy home, apartment, or workplace.


The accurate identification of mold species requires two steps:
(1) physical collection of mold samples from the moldy building;
and (2) mold laboratory analysis of the collected mold samples.

For the first step, a property owner, manager, tenant, or
employee usually hires a certified mold inspector, an industrial
hygienist, or an environmental hygienist for mold inspection and
collection of mold testing samples, at a typical cost of US $500
to $2,000 for a 2,000 square foot (186 square meters) home.

This inspection and testing fee usually includes mold laboratory
analysis and mold species identification for a small number
(3 to 10) of collected mold samples.

Alternatively, if the available funds for mold testing and mold
lab analysis are low, it is possible to achieve the same accurate
mold testing results for just $60 to $200 by using---

(1) inexpensive, transparent, sticky, adhesive tape (“lift tape
sampling”), such as Scotch® brand tape, to collect the mold
samples; and

(2) a low-cost Asian mold analysis laboratory (e.g., $20 per
sample for mold species identification and quantification,
compared to the usual $50 to $150 per sample in North America
or Europe).


Lift tape sampling and testing is an easy, practically-free
(except for the cost of the tape), and an effective way to
collect mold test samples when you---

(1) Can see mold growing on a wall, ceiling, floor, carpeting,
furniture, heating/cooling duct register, or other surface;

(2) Want to know whether a particular stain, discoloration, or
mystery substance on the wall or another surface is actually
mold growth; and/or

(3) Smell mold (the digestive gas emitted by mold eating the home
or building) and want to test a number of surfaces upon which
elevated levels of airborne mold spores may have landed or been
deposited, such as on walls, window sills, window and door trim,
refrigerator top, kitchen cabinet tops, undusted furniture,
heating/cooling duct registers, and the return air filter in
the heating/cooling system.


The easy steps involved in tape lift sampling are---

1. Cut a three-inch (3”) long strip of one-inch (1”) wide,
transparent sticky tape.

2. While wearing rubber gloves and a breathing respirator mask
(with organic vapor filters) from the local hardware or home
improvement store, press the tape strip firmly (sticky side down)
onto the visible mold growth or onto the surface being tested.

3. Remove (peel back) the tape from the surface.

4. Open up a small ziplock bag (a transparent, easily sealable
plastic storage bag), and press lightly the lift tape sample
sticky side onto the inside sidewall of the ziplock bag.

5. Close [zip shut] the ziplock bag completely. Tape it shut
if necessary to make sure no airborne mold spores can escape.

6. Attach to the outside of the ziplock bag a large adhesive
label with the tester’s name, date of sampling, property address,
the precise testing location at that address (e.g., “air
conditioning duct register in living room”), testing method
(“lift tape sampling”), and the name, postal address, email
address, phone number, and fax number (if any} of the person
submitting the sample to the mold laboratory.

7. Mail or express the collected lift tape samples (including
payment of the lab’s analysis fee} to the mold analysis
laboratory for mold species identification and quantification.



-----------------------------------------------------------------
Contact: Phillip Fry, Manager,
Mold Inspector Laboratory International, Ltd.
Phone: 63-921-352-1287 (Vancouver, Canada)
Email: mailto:moldinspector@...

For more information about mold laboratory analysis
and mold species identification, please visit ---

http://www.moldlab.biz
http://www.moldinspector.com
http://www.certifiedmoldinspectors.com
http://www.moldmart.net




--- END ARTICLE ---


Distribution Date and Time: Wed Mar 16 02:33:03 EST 2005


For more articles by this author, please visit:

http://thePhantomWriters.com/free_content/d/index.shtml#Phillip_Fry