I have been reading some of the posts here in my very recent
inquiries to learn more on the ABPA. It all seems wonderful and
exciting although I haven't really seen as many results of actual
cured illnesses as I do in the rife forums so far, perhaps because
this community is small? Can anyone as a privat person say that you
have cured AIDS, cancer, ALS, MS or any other serious illness using
the ABPA? If you have some info on that, and have a few spare
seconds, please respond either here or through my mail. Thank's in
advance for any input you might have.(I'm assuming that some of you
are also using frequency generators connected to the ABPA?)

The design of this brand new research tool, the PWM 050 Vortenna
appears to create a very high-power bio-geometrical field which can
substantially raise the general vitality of the research subject. It
has been designed to be easily wired to the Scan Cable output of the
Advanced Bio-Photon Analyzer (ABPA).

The unique design and delicate construction of the PWM 050 is based on
the Ancient Geometry of a Pentagon (a Face with five sides, each of
equal length). The value of this particular shape has long been
recognized in science and art, as constructed by Leonardo da Vinci in
Vitruvius Man (http://www.picassomio.com/poster/a324,i117948/en/). It
is also through the inherent properties of the Ancient Geometry of a
Pentagon that we are able to calculate, and use, the famous Golden
Section (also known as the Golden Mean from which the Fibonacci Series
is derived).

When 12 of these Pentagons are joined together at their edges, one of
the Five Sacred Solids (also known as the Five Platonic Solids) is
created. This resulting Solid is known as a Dodecahedron.

We have found through our research that the most important
two-dimensional Face for work in human energy engineering is in the
shape of a Pentagon, and the most important three-dimensional Solid
for work in human energy engineering is in the shape of a Dodecahedron.

If anyone has had experience in using geometrical forms or patterns
with their ABPA, we would love to hear about your results.

QB

Here's a photo of one of the original units!
QB

While I don't know your set up, I would venture to quess that the
"marked voltage" you feel on touch is RF. In the situation you are
describing, I don't think the cable is doing anything more than just
being a wire that the RF is traveling along. A piece of lamp cord
would probably do the same thing. Again, I would be concerned with
pumping that much RF into the ABPA using the cable or a piece wire.

Good Luck,
Dave

--- In biophoton@yahoogroups.com, "Dr. David W. Kenney" <drdwk1@m...>
wrote:
> Thanks...
> I found that when I put the ABPA scan cable around the tubes that
the scan
> cable has a marked voltage...even to touch.  Interesting how
powerful this
> cable is.
> I'll try what you suggest.
> D
>
> -----Original Message-----
> From: iamabigdolt [mailto:iamabigdolt@y...]
> Sent: Friday, February 25, 2005 10:37 AM
> To: biophoton@yahoogroups.com
> Subject: Message Content Re: Questions
>
>
>
> My understanding is that just the presence of the field from the
> plasma tube would be sufficient for the ABPA to pick up and broadcast
> the information. No wire needed. If using a Rife/Bare type device I
> would be concerned with the RF field overwhelming the ABPA if too
> close. Following Jeff Sutherland's lead, I use a F160 signal generator
> and hook the ABPA scan cable to it's output and then simply lay the
> cable under the input well of the ABPA. This clearly works. Hope this
> helps. Dave
>
>
>
> --- In biophoton@yahoogroups.com, "David W Kenney" <drdwk1@m...> wrote:
> >  Does anyone know exactly how to hook up the Biophoton to an EM
radiant
> > device.  Right now I have the cable wrapped around the tubes and the
> other
> > end in the input well.
> >
> > However since there is no way to test this machine.I don't know
> whether I'm
> > doing anything or not.
> >
> > Thanks
>
>
>
>
>
>
> Please limit messages to subject matter of general interest to all.
Thank
> you. The Moderators.
> Yahoo! Groups Links

Thanks...
I found that when I put the ABPA scan cable around the tubes that the scan
cable has a marked voltage...even to touch.  Interesting how powerful this
cable is.
I'll try what you suggest.
D

-----Original Message-----
From: iamabigdolt [mailto:iamabigdolt@...]
Sent: Friday, February 25, 2005 10:37 AM
To: biophoton@yahoogroups.com
Subject: Message Content Re: Questions



My understanding is that just the presence of the field from the
plasma tube would be sufficient for the ABPA to pick up and broadcast
the information. No wire needed. If using a Rife/Bare type device I
would be concerned with the RF field overwhelming the ABPA if too
close. Following Jeff Sutherland's lead, I use a F160 signal generator
and hook the ABPA scan cable to it's output and then simply lay the
cable under the input well of the ABPA. This clearly works. Hope this
helps. Dave



--- In biophoton@yahoogroups.com, "David W Kenney" <drdwk1@m...> wrote:
>  Does anyone know exactly how to hook up the Biophoton to an EM radiant
> device.  Right now I have the cable wrapped around the tubes and the
other
> end in the input well.
>
> However since there is no way to test this machine.I don't know
whether I'm
> doing anything or not.
>
> Thanks






Please limit messages to subject matter of general interest to all. Thank
you. The Moderators.
Yahoo! Groups Links

Results tell you if you are doing anything or not. I use homeopathics
with the ABPA with great and clear effect. Recently treated my mother
who is 2000 miles away with spectacular results. This was not a subtle
hard to determine result. In her words, "WOW!"



--- In biophoton@yahoogroups.com, "David W Kenney" <drdwk1@m...> wrote:

> However since there is no way to test this machine.I don't know
whether I'm doing anything or not.
>
> Thanks

My understanding is that just the presence of the field from the
plasma tube would be sufficient for the ABPA to pick up and broadcast
the information. No wire needed. If using a Rife/Bare type device I
would be concerned with the RF field overwhelming the ABPA if too
close. Following Jeff Sutherland's lead, I use a F160 signal generator
and hook the ABPA scan cable to it's output and then simply lay the
cable under the input well of the ABPA. This clearly works. Hope this
helps. Dave



--- In biophoton@yahoogroups.com, "David W Kenney" <drdwk1@m...> wrote:
>  Does anyone know exactly how to hook up the Biophoton to an EM radiant
> device.  Right now I have the cable wrapped around the tubes and the
other
> end in the input well.
>
> However since there is no way to test this machine.I don't know
whether I'm
> doing anything or not.
>
> Thanks

Kudos to those that rewrote the Use Manual. It's an excellant rewrite.
  Much much better than the previous manual....   thanks


--- In biophoton@yahoogroups.com, "QB" <quantumbalancing@y...> wrote:
>
> Hello,
>
> This email message is a notification to let you know that the new,
updated ABPA 2005
> User Manual has been uploaded to the Files area of the ABPA group.
You can view and/or
> print the manual using Adobe Reader. I recommend that you download
the latest Adobe
> Reader Version 7 from www.adobe.com.
>
> File : /ABPA 2005 User Manual.pdf
> Uploaded by : quantumbalancing <quantumbalancing@y...>
> Description : ABPA 2005 User Manual
>
> You can access this file at the URL:
>
http://groups.yahoo.com/group/biophoton/files/ABPA%202005%20User%20Manual.pdf
>
> Another great reason to belong to the ABPA User Group!
>
> Regards,
> QB
>
> quantumbalancing <quantumbalancing@y...>

Hello,

This email message is a notification to let you know that the new, updated ABPA
2005
User Manual has been uploaded to the Files area of the ABPA group. You can view
and/or
print the manual using Adobe Reader. I recommend that you download the latest
Adobe
Reader Version 7 from www.adobe.com.

File : /ABPA 2005 User Manual.pdf
Uploaded by : quantumbalancing <quantumbalancing@...>
Description : ABPA 2005 User Manual

You can access this file at the URL:
http://groups.yahoo.com/group/biophoton/files/ABPA%202005%20User%20Manual.pdf

Another great reason to belong to the ABPA User Group!

Regards,
QB

quantumbalancing <quantumbalancing@...>

in reply to your question, both the advanced biophoton analyser and
the se-5 plus are excellent machines. they have individual
capabilities and complement one another. if you can afford it ,i
would buy both .

another good place to learn about the more esoteric side of radionics
is karl welz www.magickcourse.com

of course the 'report on radionics' by russell is one of the best
books around on the subject. 'vibrational medicine' by richar gerber
is another excellent book for anyone interested in the fields of
holistic energy therapies.

best wishes
aurum solis
www.lifetechnology.org



--- In biophoton@yahoogroups.com, "go2y47or" <go2y47or@y...> wrote:
>
> -I already readed, and do not have better explanations jet /what so
> far I did readed. /I getting now Harold Sexton BURR book,that is
what
> all of these /modern re exam but was in 1933/ book abouth .I reded
> pages here-and thre from Dr Burr  I think that book is a most
read.A
> web http://www.nutrienergetics.com   120 page book download,is
alike
> the mashine and book.BUt is noe $7000/what a still/ My question :
> what the difference beatween Biophoton selling mashine and   SE-
> 5.pluss mashine.waht I need water copies for Hulda Clark
syncrometer
> Frequency copies,orhomeograft/as new words She created.I
watercopies
> will be $2500 or more .reather I do going to buy either
mashine.Thank
> Please advise me giorgianne-- In
> biophoton@yahoogroups.com, "surfer55uk" <gregorypeck2000@y...>
wrote:
> >
> > with regard to radionics in general and the se-5 in
particular ,the
> > book by don paris available from www.se-5.com is excellent and a
> > great primer for anyone unfamiliar with the field of radionics.
the
> > book is available from amazon.com and is available online at the
> site
> > above.
> >
> > best wishes
> > aurum solis
> > www.lifetechnology.org

Could the ABPA be used in some way to help cats away from my yard?  (they
chase each other and destroy pots and plants and they litter all over place
where we grow edible greens).
Thanks.
Rodiani Voreadou

-I already readed, and do not have better explanations jet /what so
far I did readed. /I getting now Harold Sexton BURR book,that is what
all of these /modern re exam but was in 1933/ book abouth .I reded
pages here-and thre from Dr Burr  I think that book is a most read.A
web http://www.nutrienergetics.com   120 page book download,is alike
the mashine and book.BUt is noe $7000/what a still/ My question :
what the difference beatween Biophoton selling mashine and   SE-
5.pluss mashine.waht I need water copies for Hulda Clark syncrometer
Frequency copies,orhomeograft/as new words She created.I watercopies
will be $2500 or more .reather I do going to buy either mashine.Thank
Please advise me giorgianne-- In
biophoton@yahoogroups.com, "surfer55uk" <gregorypeck2000@y...> wrote:
>
> with regard to radionics in general and the se-5 in particular ,the
> book by don paris available from www.se-5.com is excellent and a
> great primer for anyone unfamiliar with the field of radionics. the
> book is available from amazon.com and is available online at the
site
> above.
>
> best wishes
> aurum solis
> www.lifetechnology.org

with regard to radionics in general and the se-5 in particular ,the
book by don paris available from www.se-5.com is excellent and a
great primer for anyone unfamiliar with the field of radionics. the
book is available from amazon.com and is available online at the site
above.

best wishes
aurum solis
www.lifetechnology.org

Probably have to speak to that person,Is rule #1 /You have to ask
permission from whom You want to send anything,because otherwise all
they oilment caming back to You.I did on 2 people treatment without
asking,nothing happened with me,but I do not doing again because that
much recovery happened ---so then the opoosite able to be truth ---to
come back to me that sicness.One I did not comforted ,because they do
not want to buy the mashine,but I tryed and they Kid home teacher
cleming She was healing Her.The child can not speak unablet o walk
exceept with walker.After tratment by my mashine She does bicicle
with other Kids.
   The other one a man whom got that sicness: so much red blood cell
producting/montly need taken blood away from Him.I did treated and at
that time doesnot needed to go to doctor for a while.I sended info
but they did not wanted.All these mashines all the same
principles.Actually your mind what is makingthe connections or intent
with it.All is particle or quantum mechanics matematics Giorgianne---
In biophoton@yahoogroups.com, "David W Kenney" <drdwk1@m...> wrote:
> I also have a new AM3.  I am wondering what research protocol could
be used
> to prove that someone miles away is receiving the treatments in the
send
> mode.  Anybody know?
>
>
>
>   _____
>
> From: Daniel Caldwell [mailto:danlcaldwell@y...]
> Sent: Tuesday, February 15, 2005 9:55 PM
> To: biophoton@yahoogroups.com
> Subject: Re: Message Content AM 3
>
>
>
> I have a new model AME-3. I have been experimenting with it and
have been
> learning quite a bit.
>
>
>
> Daniel
>
> ijayway <ijayway@y...> wrote:
>
>
> Hello,
> Anyone have the opportunity to use the new AM 3?...Would like to
know
> the differences between old/new units...Thanks.
>
>
>
>
>
> Please limit messages to subject matter of general interest to all.
Thank
> you. The Moderators.
>
>
>
>
>
> Please limit messages to subject matter of general interest to all.
Thank
> you. The Moderators.
>
>
>
>
>
>
> Yahoo! Groups Sponsor
>
>
>
> ADVERTISEMENT
>
>
<http://us.ard.yahoo.com/SIG=12csr3if6/M=298184.6018725.7038619.300117
6/D=gr
>
phealth/S=1705060814:HM/EXP=1108616133/A=2532114/R=2/SIG=12krseduh/*ht
tp:/cl
>
k.atdmt.com/NFX/go/yhxxxnfx0020000014nfx/direct/01/&time=1108529733446
671>
>
>
>
<http://view.atdmt.com/NFX/view/yhxxxnfx0020000014nfx/direct/01/&time=
110852
> 9733446671>
>
>
>
> <http://us.adserver.yahoo.com/l?
M=298184.6018725.7038619.3001176/D=grphealth
> /S=:HM/A=2532114/rand=530422630>
>
>
>
>   _____
>
> Yahoo! Groups Links
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/biophoton/
>
> * To unsubscribe from this group, send an email to:
> biophoton-unsubscribe@yahoogroups.com
> <mailto:biophoton-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo!
> <http://docs.yahoo.com/info/terms/>  Terms of Service.

I also have a new AM3.  I am wondering what research protocol could be used to prove that someone miles away is receiving the treatments in the send mode.  Anybody know?

 

---

From: Daniel Caldwell [mailto:danlcaldwell@...]
Sent: Tuesday, February 15, 2005 9:55 PM
To: biophoton@yahoogroups.com
Subject: Re: Message Content AM 3

 

I have a new model AM-3. I have been experimenting with it and have been learning quite a bit.

 

Daniel

ijayway <ijayway@...> wrote:

Hello,
Anyone have the opportunity to use the new AM 3?...Would like to know
the differences between old/new units...Thanks.

 

Hello,
Anyone have the opportunity to use the new AM 3?...Would like to know
the differences between old/new units...Thanks.





Please limit messages to subject matter of general interest to all. Thank you. The Moderators.

Hello,
Anyone have the opportunity to use the new AM 3?...Would like to know
the differences between old/new units...Thanks.

-Thanks the book is very good one!! Gioegianne-- In
biophoton@yahoogroups.com, "QB" <james@c...> wrote:
>
> Members: A new E-Book entitled "Practical Mental Influence" by
William
> W. Atkinson (1908) has been posted in the files area. This is one of
> the greatest books of all time dealing with the subject of mental
> concentration which could be a valuable practice when working with
the
> ABPA and the remote transmission of patterns.

Sombody know to inprinted waters how can counting the printed
water .i like to know if inprinted correctly.Examle Kidney print If I
able to do,but how to looking if correct or not?Maybe only choice to
looking 2 copy to resonate or not?Giorgianne

Can I pay ahed for the Marc water system.I want to have one Thank You
giorgianne

Read the book Power vs. Force by Dr. David R. Hawkins or do a Google
search for 'Muscle Testing' for in-depth information on this topic.

QB

--- In biophoton@yahoogroups.com, pano pano <pano461@y...> wrote:
>
>
> Hello
> What is muscle testing and how it works?
> PaNo

Hello
What is muscle testing and how it works?
PaNo


--- QB <quantumbalancing@...> wrote:

>
> --- In biophoton@yahoogroups.com, "Rodiani Voreadou"
> <vrodiani@h...>
> wrote:
> >
> > I need answers to the following questions.
> >
> > When we use the Vortenna,
> >
> > (a) do we place the bottle to be imprinted with
> the remedy on the
> side WITHOUT magnets, as in the use of PWM?
>
> Probably yes, but either side will work depending on
> your intention.
> Some people use North and some people use South.
>
> > (b) if we use the Vortenna without bottle on it, I
> understand that
> that the side without the magnets of the Vortenna
> disk will be
> sending out "good" information to somebody in front
> of it (as with
> the PWM), if the ABPA operates in Sending mode and
> if this person's
> picture is in the Picture Well or we are cloning a
> "good" substance
> in the Input Well - right?
>
> Magnets have a North and South polarity, not
> necessarily a 'Good'
> and 'Bad' polarity. One would have to determine the
> desired effects
> through muscle testing.
>
> > (c) If YES in the above question (b), which effect
> is stronger:
> the sending action of the ABPA (to the person via
> his picture) or
> the effect that comes out of the ("good" side of
> the) Vortenna? In
> other words: is the person, whose picture is in the
> Picture Well,
> getting additional benefit if he is sitting in front
> of the (non-
> magnet) side of the Vortenna?
>
> One could possibly determine this through muscle
> testing.
>
> > (d) Since the Scan Cable port of the ABPA is both
> an input and
> output port, what happens to the "negative"
> information that comes
> out of the side of the Vortenna which has the
> magnets? Isn't it a
> big negative information which the ABPA has to
> neutralize - and
> therefore a big part of ABPA's "work" is "wasted" on
> an artificial
> negativity?  Does this make it necessary for us to
> work with a
> subject' s pisture in the Picture Well, so that the
> ABPA can have a
> direction in its function of neutralizing the
> "negativity" of the
> magnet-side of the Vortenna?
>
> There is no 'negative' information coming off of the
> side with
> magnets. It is a polarity, the magnetic force which
> seeks the South
> needle of a compass. Is the North Pole of the Earth
> 'Good'
> or 'Positive' and the South Pole 'Bad' or negative?
> It is polarity
> of forces and both appear to be necessary for
> balance.
>
>
>
>
>
>
>
>




__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo

--- In biophoton@yahoogroups.com, "Rodiani Voreadou" <vrodiani@h...>
wrote:
>
> I need answers to the following questions.
>
> When we use the Vortenna,
>
> (a) do we place the bottle to be imprinted with the remedy on the
side WITHOUT magnets, as in the use of PWM?

Probably yes, but either side will work depending on your intention.
Some people use North and some people use South.

> (b) if we use the Vortenna without bottle on it, I understand that
that the side without the magnets of the Vortenna disk will be
sending out "good" information to somebody in front of it (as with
the PWM), if the ABPA operates in Sending mode and if this person's
picture is in the Picture Well or we are cloning a "good" substance
in the Input Well - right?

Magnets have a North and South polarity, not necessarily a 'Good'
and 'Bad' polarity. One would have to determine the desired effects
through muscle testing.

> (c) If YES in the above question (b), which effect is stronger:
the sending action of the ABPA (to the person via his picture) or
the effect that comes out of the ("good" side of the) Vortenna? In
other words: is the person, whose picture is in the Picture Well,
getting additional benefit if he is sitting in front of the (non-
magnet) side of the Vortenna?

One could possibly determine this through muscle testing.

> (d) Since the Scan Cable port of the ABPA is both an input and
output port, what happens to the "negative" information that comes
out of the side of the Vortenna which has the magnets? Isn't it a
big negative information which the ABPA has to neutralize - and
therefore a big part of ABPA's "work" is "wasted" on an artificial
negativity?  Does this make it necessary for us to work with a
subject' s pisture in the Picture Well, so that the ABPA can have a
direction in its function of neutralizing the "negativity" of the
magnet-side of the Vortenna?

There is no 'negative' information coming off of the side with
magnets. It is a polarity, the magnetic force which seeks the South
needle of a compass. Is the North Pole of the Earth 'Good'
or 'Positive' and the South Pole 'Bad' or negative? It is polarity
of forces and both appear to be necessary for balance.

I need answers to the following questions.

When we use the Vortenna,

(a) do we place the bottle to be imprinted with the remedy on the side
WITHOUT magnets, as in the use of PWM?

(b) if we use the Vortenna without bottle on it, I understand that that the
side without the magnets of the Vortenna disk will be sending out "good"
information to somebody in front of it (as with the PWM), if the ABPA
operates in Sending mode and if this person's picture is in the Picture Well
or we are cloning a "good" substance in the Input Well - right?

(c) If YES in the above question (b), which effect is stronger: the sending
action of the ABPA (to the person via his picture) or the effect that comes
out of the ("good" side of the) Vortenna? In other words: is the person,
whose picture is in the Picture Well, getting additional benefit if he is
sitting in front of the (non-magnet) side of the Vortenna?

(d) Since the Scan Cable port of the ABPA is both an input and output port,
what happens to the "negative" information that comes out of the side of the
Vortenna which has the magnets? Isn't it a big negative information which
the ABPA has to neutralize - and therefore a big part of ABPA's "work" is
"wasted" on an artificial negativity?  Does this make it necessary for us to
work with a subject' s pisture in the Picture Well, so that the ABPA can
have a direction in its function of neutralizing the "negativity" of the
magnet-side of the Vortenna?

Answers and any comments are welcome with thanks.
Rodiani Voreadou
vrodiani@...

The ABPA Computer Connecting Cable and setup is clearly shown and
explained on the Bio-Photonanalyzer website:
http://www.biophotonanalyzer.com/products.htm

what ends are on the cable to hook it to the abpa
and a computer?
what ports does the computer need to have? som
computers do not have serial ports.
roger




__________________________________
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
http://promotions.yahoo.com/new_mail

-I think so G-- In biophoton@yahoogroups.com, "Jijar Singh"
<singhjijar@y...> wrote:
>
> Can we broadcast to a whole family at one time by putting their DNA
> sample, like nail clipping, in the INPUT well and set the ABPA
> to "Antidode + Neutralize" on and broadcast whole night?
>
> Your help greatly appreciated
> Jijar