Robert,
We have an ABPA here and what I am reading about
the unit is sometimes very confusing. I do not
understand how a piece of crystal could be useful.
What do you use as the ORIGINAL sample to inject the
useful frequencies into the crystal? I just do not
understand the total concept. Can you explain?

Richard


--- raggar11 <raggar11@...> wrote:

> Hi Carlos,
> I was talking about a real quartz crystal not
> container. They hold
> energy really well and you can use it instead of
> imprinting
> jewelry. It can be carried with you or used to hold
> information for
> later use. I still use filtered water when I want
> an oral delivery
> system.
> Regards,
> Robert
>
>
>
> --- In biophoton@yahoogroups.com, "Carlos LeClair"
> <c.leclair2@k...>
> wrote:
> >
> > Dear Robert,
> > Do you mean you use a clear quartz crystal
> container when doing
> the
> > imprinting?
> > Then do you transfer the imprinted liquid to some
> other kind of
> container?
> > Have you successfully imprinted to deal with a
> current flu or
> pneumonia,
> > etc?
> > I am wondering what steps you go through to do
> something like this.
> > Thanks!
> > Carlos
> >
> > ----- Original Message -----
> > From: "raggar11" <raggar11@y...>
> > To: <biophoton@yahoogroups.com>
> > Sent: Wednesday, December 28, 2005 9:05 AM
> > Subject: Message Content Re: Photos ... Polaroid
> or Digital?
> >
> >
> > >
> > > Thanks ... guess I needed to hear someone say
> that ... I was
> > > starting to doubt the results I was getting. I
> have the new
> nikon
> > > 10 mexapixel and was printing them with highest
> quality on 8 1/2
> x
> > > 11 and found that a well taken polaroid blows it
> away in
> results. I
> > > still find that a spot of blood as a "witness"
> works the best. I
> > > was also imprinting onto small vials of filtered
> water (1/6
> vodka to
> > > kill bacteria) and find that a cleared quartz
> crystal really does
> > > the job. Love this machine!
> > > Thanks for the input!
> > > Robert
> > >
> > >
> > > -- In biophoton@yahoogroups.com,
> "tymetoplay2001"
> > > <tymetoplay2001@y...> wrote:
> > >>
> > >> My experience (practitioner of 30 yrs), has
> shown me that the
> > > poloroid
> > >> photos work much better than digital...have
> found digitals give
> > > false
> > >> readings when doing testing and are flat
> energetically.
> > >>
> > >> Jeff did some transmissions via his machine and
> mine that
> produced
> > > no
> > >> results for me,a few years ago...digital photo
> he produced was
> the
> > >> witness...not saying it was because of the
> digital...just
> sharing
> > >> outcome using digital...
> > >>
> > >> I recommend poloroids over digitals...
> > >>
> > >> Byron
> > >>
> > >>
> > >>
> > >>
> > >> --- In biophoton@yahoogroups.com, "QB"
> <quantumbalancing@y...>
> > > wrote:
> > >> >
> > >> > Robert,
> > >> >
> > >> > Dr. Jeff Sutherland believes that digital
> photographs can be
> > > very
> > >> > effective when used with the ABPA. He
> reported this on his
> > > website
> > >> > (http://www.frequencyresearch.org/) as shown
> below:
> > >> >
> > >> > The Advanced Biophoton Analyzer (ABPA) is a
> device that can be
> > > used
> > >> > for many purposes. One of them is to
> broadcast frequencies on
> a
> > > very
> > >> > low frequency carrier wave that can penetrate
> the earth and is
> > >> > independent of distance. Years of work on
> refining the
> > >> > hardware/software setup of this device
> enables excellent
> effects
> > > at
> > >> > a distance. The frequency effect on a living
> organism at a
> > > remote
> > >> > location is comparable to being in the room
> with an EMEM
> plasma
> > >> > device or directly connected to electrodes.
> Contact Dale
> Fawcett
> > > at
> > >> > (360) 598-6585 to discuss details of how this
> is possible.
> > >> >
> > >> > The ABPA has some advantages over direct
> contact with
> frequency
> > >> > devices as it is able to monitor the energy
> system of the
> target
> > > and
> > >> > only transmit information that will balance
> that energy system
> > > and
> > >> > bring it into a higher energy state. It is a
> self-correcting
> > > device
> > >> > that works with and enhances the effect of
> frequency
> generators
> > >> > attached to it.
> > >> >
> > >> > I am often asked about using the Advanced
> Biophoton Analyzer
> > > (ABPA)
> > >> > with frequency devices and how to connect an
> F160 or FSCAN.
> The
> > >> > photo above shows an F160 connected to the
> ABPA wire which
> runs
> > >> > under the ABPA input well.
> > >> >
> > >> > The wire that comes with the ABPA has the
> best impedance match
> > > to
> > >> > the device and provides about five times the
> power output of
> > > using
> > >> > common phono jack cable that is terminated
> correctly with a 50
> > > ohm
> > >> > resistor. Because the APBA cable has a
> mini-phono jack at the
> > > end of
> > >> > it you will need a female mini-phono jack to
> male phono jack
> > >> > converter from Radio Shack that will allow
> the ABPA cable to
> > > plug
> > >> > into an FSCAN2. Use the power port on the
> FSCAN2 with the
> > > voltage
> > >> > turned all the way up to 16 volts. This
> provides the maximum
> > >> > magnetic field around the cable. Placing the
> cable under the
> > > input
> > >> > well of the ABPA allows the magnetic field
> around the cable to
> > >> > extend up into the input well where it is
> scanned and
>
=== message truncated ===




__________________________________________
Yahoo! DSL – Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com