Hi Carlos,
I was talking about a real quartz crystal not container. They hold
energy really well and you can use it instead of imprinting
jewelry. It can be carried with you or used to hold information for
later use. I still use filtered water when I want an oral delivery
system.
Regards,
Robert



--- In biophoton@yahoogroups.com, "Carlos LeClair" <c.leclair2@k...>
wrote:
>
> Dear Robert,
> Do you mean you use a clear quartz crystal container when doing
the
> imprinting?
> Then do you transfer the imprinted liquid to some other kind of
container?
> Have you successfully imprinted to deal with a current flu or
pneumonia,
> etc?
> I am wondering what steps you go through to do something like this.
> Thanks!
> Carlos
>
> ----- Original Message -----
> From: "raggar11" <raggar11@y...>
> To: <biophoton@yahoogroups.com>
> Sent: Wednesday, December 28, 2005 9:05 AM
> Subject: Message Content Re: Photos ... Polaroid or Digital?
>
>
> >
> > Thanks ... guess I needed to hear someone say that ... I was
> > starting to doubt the results I was getting. I have the new
nikon
> > 10 mexapixel and was printing them with highest quality on 8 1/2
x
> > 11 and found that a well taken polaroid blows it away in
results. I
> > still find that a spot of blood as a "witness" works the best. I
> > was also imprinting onto small vials of filtered water (1/6
vodka to
> > kill bacteria) and find that a cleared quartz crystal really does
> > the job. Love this machine!
> > Thanks for the input!
> > Robert
> >
> >
> > -- In biophoton@yahoogroups.com, "tymetoplay2001"
> > <tymetoplay2001@y...> wrote:
> >>
> >> My experience (practitioner of 30 yrs), has shown me that the
> > poloroid
> >> photos work much better than digital...have found digitals give
> > false
> >> readings when doing testing and are flat energetically.
> >>
> >> Jeff did some transmissions via his machine and mine that
produced
> > no
> >> results for me,a few years ago...digital photo he produced was
the
> >> witness...not saying it was because of the digital...just
sharing
> >> outcome using digital...
> >>
> >> I recommend poloroids over digitals...
> >>
> >> Byron
> >>
> >>
> >>
> >>
> >> --- In biophoton@yahoogroups.com, "QB" <quantumbalancing@y...>
> > wrote:
> >> >
> >> > Robert,
> >> >
> >> > Dr. Jeff Sutherland believes that digital photographs can be
> > very
> >> > effective when used with the ABPA. He reported this on his
> > website
> >> > (http://www.frequencyresearch.org/) as shown below:
> >> >
> >> > The Advanced Biophoton Analyzer (ABPA) is a device that can be
> > used
> >> > for many purposes. One of them is to broadcast frequencies on
a
> > very
> >> > low frequency carrier wave that can penetrate the earth and is
> >> > independent of distance. Years of work on refining the
> >> > hardware/software setup of this device enables excellent
effects
> > at
> >> > a distance. The frequency effect on a living organism at a
> > remote
> >> > location is comparable to being in the room with an EMEM
plasma
> >> > device or directly connected to electrodes. Contact Dale
Fawcett
> > at
> >> > (360) 598-6585 to discuss details of how this is possible.
> >> >
> >> > The ABPA has some advantages over direct contact with
frequency
> >> > devices as it is able to monitor the energy system of the
target
> > and
> >> > only transmit information that will balance that energy system
> > and
> >> > bring it into a higher energy state. It is a self-correcting
> > device
> >> > that works with and enhances the effect of frequency
generators
> >> > attached to it.
> >> >
> >> > I am often asked about using the Advanced Biophoton Analyzer
> > (ABPA)
> >> > with frequency devices and how to connect an F160 or FSCAN.
The
> >> > photo above shows an F160 connected to the ABPA wire which
runs
> >> > under the ABPA input well.
> >> >
> >> > The wire that comes with the ABPA has the best impedance match
> > to
> >> > the device and provides about five times the power output of
> > using
> >> > common phono jack cable that is terminated correctly with a 50
> > ohm
> >> > resistor. Because the APBA cable has a mini-phono jack at the
> > end of
> >> > it you will need a female mini-phono jack to male phono jack
> >> > converter from Radio Shack that will allow the ABPA cable to
> > plug
> >> > into an FSCAN2. Use the power port on the FSCAN2 with the
> > voltage
> >> > turned all the way up to 16 volts. This provides the maximum
> >> > magnetic field around the cable. Placing the cable under the
> > input
> >> > well of the ABPA allows the magnetic field around the cable to
> >> > extend up into the input well where it is scanned and
> > transmitted.
> >> >
> >> > The F160 has a female BNC connector so you must get an
> > additional
> >> > part from Radio Shack. You need a female phono jack to male
BNC
> >> > connector converter. Turn the voltage all the way up on the
F160
> > as
> >> > well. This will work for FSCANs with BNC connectors.
> >> >
> >> > There are eight switches on the ABPA. For frequency work they
> > should
> >> > be set as follows:
> >> >
> >> > Inherited IDF - Off
> >> > Chemical Sensitivities - Off
> >> > Dampening Field - Off
> >> > Antidote/Clone - Auto
> >> > Balance/Neutralize - Auto
> >> > On/Off - On
> >> > Send/Off - Send
> >> > Plant/Animal - Auto
> >> >
> >> > A final tip that will magnify the output of the ABPA is to
take
> > a
> >> > high resolution photo of the target and print it out on
8.5x11"
> >> > paper on a high quality printer (1200 dpi or better). Fold the
> > paper
> >> > into quarters and put it in the photo well of the ABPA.
> >> >
> >> > The improvement in performance with these strategies is quite
> >> > significant. Hooking up the cable properly with increase
> >> > effectiveness by 5 times. Using a high resolution digital
photo
> >> > instead of a Polaroid photo will give another 5 fold
> > improvement.
> >> > Taking the picture with the camera on a tripod will double the
> >> > effective resolution and multiply output by 2. Finally,
printing
> > the
> >> > photo in an 8.5x11" format gives a fourfold gain. You now
have a
> >> > device that works 5x5x2x4=200 times better than previously!
> >> >
> >> > The only challenge remaining is finding the right frequencies
> > for
> >> > your purposes. As Dr. Royal Rife once said, if you have the
> > wrong
> >> > frequency or set of frequencies you will get no effect. For
help
> > in
> >> > finding the right frequencies for your needs, contact the
> > Frequency
> >> > Research Foundation.
> >> >
> >>
> >
> >
> >
> >
> >
> >
> >
> > Please limit messages to subject matter of general interest to
all. Thank
> > you. The Moderators.
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>