These ideas were suggested by Dr. Jeff Sutherland. It would be
interesting if group members could try these and report back with
the results. Here they are:

There are eight switches on the ABPA. For frequency work they should
be set as follows:

Inherited IDF - Off
Chemical Sensitivities - Off
Dampening Field - Off
Antidote/Clone - Auto
Balance/Neutralize - Auto
On/Off - On
Send/Off - Send
Plant/Animal - Auto

A final tip that will magnify the output of the ABPA is to take a
high resolution photo of the target and print it out on 8.5" x 11"
paper on a high quality printer (1200 dpi or better). Fold the paper
into quarters and put it in the photo well of the ABPA.

The improvement in performance with these strategies is quite
significant. Hooking up the cable properly will increase
effectiveness by 5 times. Using a high resolution digital photo
instead of a Polaroid photo will give another 5 fold improvement.
Taking the picture with the camera on a tripod will double the
effective resolution and multiply output by 2. Finally, printing the
photo in an 8.5" x 11" format gives a fourfold gain. You now have a
device that works 5 x 5 x 2 x 4 = 200 times better than previously!

Good luck!
QB