Dear Richard Mac,
My name is Dr Graham and I developed the LazrPulsr 4X
therapy unit. We do have healing frequencies for bone
and most tissue types and frequencies for pain that we
developed for our laser. I also believe that 635 nm
laser to be a significantly better than the 650 nm
laser for healing. To create a laser with accurate
pulsed frequency capability on your own is quite a
feat, you must have a good understanding of
electronics. The frequencies that we use begin at
around 40KHz and extend through 1MHz for these
conditions. If your unit will accurately produce these
frequencies you can use AK and ask specifically for
the correct frequency for your condition. I don't
believe you will find any frequencies below 1K that
will will give you the results you are looking for. I
never did, which is why I developed the LazrPulsr.

I agree that the number of frequencies in the lists
are overwhelming. This is because they are trying to
kill specific pathogens in different stages of life
and there are a lot of different pathogens that may be
involved. If you know which pathogen is there and what
stage of life it is in then you only need one
frequency. Well that is one frequency for each
pathogen present and for each stage of life for each
pathogen. Which is still a lot of numbers plus it is
impossible to know what all pathogens are present,
which is is why they treat them all.

Our answer is two fold. First I always try to treat
the patient before I treat the bugs. Usually just
stimulating the healing of the normal tissue and
immune system will take care of the bugs no matter
what type they are. This only requires a few
frequencies because we are just treating you.

Secondly, if we find the need to help the body out and
suppress or kill some of the pathogens we installed a
sweep function into the laser. With this you can enter
a high and low frequency to establish a range and then
enter specific frequencies you are specifically
concerned with and how long you want the program to
run which the longer it runs the more specific and
detailed the program becomes. Then the laser will run
a program that scans all frequencies within the
programed range with special overlapping focus on the
frequencies that were entered. This is the best way to
address all the pathogens of a specific type without
having to enter hundreds of numbers.

If you are interested in talking further off line my
email is info@... and the laser site is
www.lazrpulsr.com
Thank you
Dr.Gerry



--- r2w2m1 <r2w2-m1@...> wrote:

> Jennifer;
>
> Thank You for your most prompt reply to my message.
> You certainly did
> bring forth a substantial number of "Dental
> Frequencies" But this
> really supports one of the points I was endeavoring
> to make: that
> there are such a large quantity of frequencies of
> such widely varying
> numerical values, that I find the situation somewhat
> overwhelming.
> And this is one of the things that I am asking: Are
> there members
> of this Group who have
> first-hand/close-up/"hands-on" knowledge of
> which amongst these frequencies works well,
> (specifically for
> the "Dental" needs that I have described),and, which
> of the listed
> frequencies have a low degree of effectiveness;
> especially relative
> to their being used with pulsed Lasers (and, by the
> same token, are
> there "new" frequencies that are showing up as
> working particularly
> well with pulsed laser assemblies)?
>
> I did look at Bruce Stenulson's "Stimulating"
> Frequencies and found
> two of interest: 7 Hertz for the Healing of Bones;
> and 835 Hertz
> to stimulate/normalize the Immune System. I have
> tried Kinesiology
> a number of times in the past with absolutely no
> luck.
>
> Well, I certainly want to follow up on all these
> matters, but,
> somewhat like your being "headed out the door" as
> you left your
> message, I am completing a rather intense period of
> being on-line
> for many hours, and must tend to other matters now
> including getting
> some rest. It may be 24 to 36 hours before I will
> be able to make
> up and send a response to any new messages.
>
> Best Regards, Richard Mac
>
>
>
> --- In Therapeutic-Laser_Therapy@yahoogroups.com,
> "Jennifer Ruby"
> <ruby@...> wrote:
> >
> > Hi Richard!
> >
> > I'm on my way out, but thought I'd take a very
> quick minute and
> tell you that you can find a LOT of specific
> frequency info on Turf's
> list:
>
>
>
>
>