Hi stevewonder5000,

All my arrays are not pulsed, they are steady on.

I am aware of the various frequencies to pulse LEDs for various healing modes.
there are the Nogier frequencies for example.

I have looked into that and did offer a pulser for my units in the past. but
many people could not get it to work with their computers. so I discontinued it.
will be offering it again in the future when I get the circuit modified a little
to work with more computers.

Pulsing the LEDS has a different effect than the steady on LEDS. there is place
for both of them I chose the steady on because you get more light in a shorter
time. that is in itself one way that the LEDS heal, the pulsing mode triggers
something else entirely, and can be done with sound also.


Take care,
V


> Reading this article below I have come to the conclusion that specific
> frequencies in HZ make for better healing. QUOTE:-


> "tissue derived from ectodermal tissues had a positive response to 292
> Hz. Tissue derived from endodermal tissues responded best to 584 Hz
> and tissue derived from mesodermal tissues responded best to 1168 Hz.
> These frequencies are all harmonics of each other and happen to be
> harmonics of the D note."

> I got the above from this website
> http://www.esmhome.org/library/led.html

> V what frequency does your dual arrays 660nm/880nm red and infrared
> operate on please




--